Repairing the Spider Hole


Wear around Spider Hole.


JB Weld in place.


Treasurecove hole repair procedure:

1. Rough sand
2. JB Weld - 24 hour dry time
3. Fine sand / file to shape
4. Acrylic paint (usually black and flesh tone are the correct colors)
5. Mask off rectangular area about 1/3" greater than the repaired area
6. 15 coats of clear lacquer (10 minutes between coats)
7. Wet sand with 1500 grit paper
8. High speed buff with Novus 3, then 2, ...
9. Carnauba!!!

 


Finished product. Almost undetectable by the human eye.

 

HOME